top of page
ZC410 Chiller

ZC410 Chiller

ZC410 series is a range of air-cooled chillers, with cooling capacities
from 5 kW to 872 kW, suitable for outdoor installation, thanks to
their IP54 degree of protection, particularly suitable for use in both
industrial processes and civil air conditioning.

  • Description


    This range is equipped with a brazed plate evaporator and has been
    designed and engineered to have high energy efficiencies, low noise,
    easy installation, and simplicity in maintenance works, both routine
    and extraordinary. Consisting of top brand components to offer a
    product of high quality and reliability, the entire range is designed
    to make the installation phase immediate. Maintenance operations
    are also simple and facilitated by the ability to reach all components
    with both hands.
    The color is:
    White RAL7035.
    Blue RAL 5002.
    COOLING CIRCUIT
    The refrigerant circuit is simply manufactured to avoid every kind of
    vibrations on the welding. In fact, all the copper pipes have a small
    amount of welding spots to eliminate refrigerant gas leaks. The
    copper thickness is consistent to realize the best smelting and the
    perfect welding.
    The cooling circuit consists of SCROLL compressor with carter
    resistance. According to the power, every unit is composed of two or
    four cooling circuits with two or four compressors each.
    ELECTRICAL BOARD
    The electrical board has quite large sizes and it’s located in a
    specific area surrounded by its frame. All the cables of the electrical
    panel are numbered and connected to the terminal box, also there
    always is the wiring diagram to show the connections.
    Completed with circuit breaker to protect the main parts of the
    chiller, the control section consists of a microprocessor card with
    external interface. Every board is equipped with a lock door device.
    The standard power supply is 400 ±10%/3/50Hz. Optional: power
    supply 460 ±10%/3/60Hz
    HYDRAULIC MODEL
    Our range can include the hydraulic model or not, therefore it’s an
    option that can be required according to the type of system.
    It can be shaped in different ways:
    • no water tank and no pump
    • just tank
    • just pump or double pump
    • water tank and pump or double pump
    • water tank, primary and secondary pump
    The water tank is standardly equipped with water filter to protect
    the evaporator.
    TEST
    Each chiller is tested in the testing room.
    During this step, modes are checked the following operation:
    - correct assembly of the components
    - components fastening
    - operation in accordance with safety standards
    - electrical test in accordance with Standard EN60204
    - operation of the electrical board
    - chiller performance under standard conditions
    VERSIONS
    ZH410 = Heat Pump (hot and cold water)
    ZC410_PR = Primary and Secondary Pump
    ZC410_Re = Rental

bottom of page